A BRUGG GROUP COMPANY
ARMOPEX is a reinforced, flexible pipe system for modern local and district heating networks. It bridges the gap between conventional PEX pipes and metallic pipe systems, offering higher safety, minimal heat losses, and maximum future readiness. It is designed for the dynamic and sustainable heat networks of today and tomorrow.
Maximum operating temperature: up to 115 °C
Operating pressure: up to PN12 (12 bar) according to TS 17889 / TR4
Aramid-reinforced PE-Xa inner pipe with integrated aluminium barrier for high pressure and temperature resistance
Highly efficient PUR insulation with the world’s lowest thermal conductivity of λ = 0.0199 W/mK for minimal heat loss
High thermal efficiency and reduced operating costs
Robust, UV-resistant LLD-PE outer jacket for protection against moisture and mechanical damage
Supplied in long, customisable coils for fast, joint-minimised, and cost-effective installation
Designed for a service life of over 50 years
Suitable for local and district heating
Pre-insulated composite pipe system manufactured according to EN 15632 for enhanced operational requirements
We look forward to your contact.
| Type | Nominal diameter | PEX inner pipe | Min. bending radius | Max. ring length* | |
| Jumbo | Maxi | ||||
| DN | mm | m | m | m | |
| APX 40/91 | 32 | 40 x 3.7 | 0.55 | 400 | - |
| APX 50/111 | 40 | 50 x 4.5 | 0.60 | 300 | - |
| APX 63/126 | 50 | 62 x 5.2 | 0.65 | 192 | 300 |
| APX 75/142 | 65 | 73 x 5.7 | 0.75 | 160 | 250 |
| APX 90/162 | 75 | 87 x 6.5 | 1.00 | 92 | 150 |
| APX 110/162 | 90 | 104 x 7.4 | 1.10 | 92 | 150 |
| APX 125/182 | 100 | 117 x 7.4 | 1.40 | 52 | 90 |
